• Smok TA Coils 5-pack
    Click to zoom
  • Smok TA Coils 5-pack
  • Smok TA Coils 5-pack
Availability: In Stock

SMOK

-

smok-ta-coil

Smok TA Coils 5-pack

1.250,00 TL
SMOK TA Coil 5-Pack

FeCrAl mesh replacement coil series developed for the SMOK T-Air Subtank. Offers intense flavor and DTL vapor performance at different power levels with 0.15Ω, 0.2Ω, and 0.4Ω options.

5 Coils FeCrAl Mesh Press-Fit Installation 20–70W Options T-Air Subtank Compatible DTL Vaping
COMPATIBILITY WARNING: SMOK TA coils are installed into the SMOK T-Air Subtank, not directly into the vape device. They are compatible with the Mag Solo and Morph 3 kits because these kits use the T-Air Subtank.
SMOK TA Coil Features
Mesh Heating Surface

The mesh structure helps to heat different points of the cotton more evenly and ensures consistent vapor production due to its large contact area.

FeCrAl Alloy

The FeCrAl mesh wire used in TA coils is designed for fast response and balanced heat distribution in variable wattage mode.

Press-Fit Installation

The coil is not screwed in. After opening the tank base, the coil is aligned in the correct direction and pushed into the slot to be fully seated.

TA Coil Resistance Options
0.15Ω Dual Mesh Intense & Warm DTL

Power range: 40–60W

Recommended: 55W

Structure: Dual Mesh

A dual mesh coil option for users who want dense vapor, fast response, and warm DTL draws.

0.2Ω 2-in-1 Mesh High-Power DTL

Power range: 50–70W

Recommended: 65W

Structure: 2-in-1 Single Mesh

A TA series coil option that operates at higher power; designed for warm draws, distinct flavor, and thick vapor production.

0.4Ω Single Mesh Balanced & Cool DTL

Power range: 20–45W

Recommended: 40W

Structure: Single Mesh

Developed for users who prefer lower power consumption, cooler vapor, and a balance between flavor and vapor.

Which TA Coil Should You Choose?
Coil Power Range Recommended Draw Character Power Usage Liquid Recommendation
TA 0.15Ω Dual Mesh 40–60W 55W Warm & Intense DTL Medium-High Premium freebase, ~60–70% VG
TA 0.2Ω 2-in-1 Mesh 50–70W 65W High-Power DTL High Premium freebase, ~70% VG
TA 0.4Ω Single Mesh 20–45W 40W Cooler & Balanced DTL Lower Premium freebase, ~50–70% VG
The recommended value is not mandatory. You should start the new coil from the lower end of the power range and adjust it gradually based on your flavor and vapor preferences. The value printed on the coil takes precedence.
Compatible Tank and Devices

Directly compatible atomizer: SMOK T-Air Subtank

The following kits are compatible with the TA Coil series as they include the T-Air Subtank in their packages:

  • SMOK Morph 3 Kit – with T-Air Subtank
  • SMOK Mag Solo Kit – with T-Air Subtank
  • Other mods with 510 connections using the SMOK T-Air Subtank
If a different atomizer is attached to the device, compatibility is determined by the coil system of that specific atomizer, not the device model. TA Coils should only be installed in the T-Air Subtank.
Liquid Selection for TA Coil

SMOK TA coils are low-resistance DTL coils that produce high vapor. Therefore, they are recommended for use with premium/freebase regular vape liquids.

Due to high wattage and intense vapor production, the TA Coil series is not suitable for high-nicotine salt liquids. Regular premium liquids with low nicotine content suitable for DTL vaping should be chosen.
How to Install a New TA Coil?
  1. Remove the atomizer from the device and open the bottom base of the tank.
  2. Pull the old coil straight out to remove it from the tank.
  3. Drip a few drops of liquid onto the visible cotton areas of the new coil.
  4. Align the notches on the coil with the tank slot in the correct direction.
  5. Push the coil firmly into the slot until there is no gap left.
  6. Close the bottom base of the tank back up.
  7. Fill the tank with suitable premium liquid.
  8. Wait about 10–15 minutes for the cotton to be fully saturated.
  9. Start using the device at the lower wattage of the recommended range.
Do not fire the device when the atomizer is empty. Firing before the coil cotton is sufficiently saturated can cause a permanent burnt taste.
Technical Specifications
Brand SMOK
Coil Series TA Coil
Compatible Atomizer SMOK T-Air Subtank
Resistance Options 0.15Ω / 0.2Ω / 0.4Ω
Wire Material FeCrAl alloy mesh
Operation Method Variable Wattage mode
Installation Press-Fit – push-to-install system
Vaping Style DTL – Direct to Lung
Package Contents 5 TA Coils in selected resistance
Package Contents

5 × SMOK TA replacement coils in selected resistance

The five coils in the package have the same resistance value. The T-Air Subtank, vape device, and liquid are not included in the package.

About Coil Lifespan

Coil lifespan is not fixed. The VG/PG ratio of the liquid, intensity of flavor and sweetener, wattage, vaping frequency, and proper priming of the new coil directly affect the lifespan.

A noticeable reduction in flavor, burnt taste, lower than normal vapor production, or frequent leaking from the coil can indicate that it is time for a replacement.

IMPORTANT WARNING: Opened, tested, or e-liquid-contacted coils may not be eligible for return/exchange due to hygiene and resale conditions. Check that the label "T-Air" is on your tank and "TA" is on your coil before opening the package. If you are unsure, please contact our support team.
Write a review
NEWPRODUCTS

Whatsapp Contact