SMOK RPM 4 Coil 5-Pack
Replacement mesh coil series developed for the SMOK Nord 6 RPM 4 empty pod cartridge.
Available in 0.15Ω and 0.6Ω options, offering performance tailored to different
power and draw preferences.
5 Coils
Mesh Technology
0.15Ω / 0.6Ω
Press-Fit Installation
Nord 6 RPM 4 Pod Compatible
IMPORTANT COMPATIBILITY NOTICE: This product is not the RPM or LP2 coil used for the
original SMOK RPM 4 Pod Kit. The new RPM 4 coil series is specifically designed for
use with the RPM 4 empty cartridge of the SMOK Nord 6 device.
SMOK RPM 4 Coil Features
Mesh Heating Structure
The wide heating surface ensures more balanced liquid vaporization and
more consistent flavor delivery.
Press-Fit System
The coil is not threaded. It is simply pushed into the slot at the bottom
of the Nord 6 RPM 4 cartridge.
Dual Seal Design
The seal system on the coil helps ensure a tighter cartridge connection
and reduces the risk of liquid leakage.
Two Resistance Options
The 0.15Ω option is for open DTL draws, while the 0.6Ω option is for
lower power, controlled RDL, or loose MTL draws.
RPM 4 Coil Comparison
0.15Ω Mesh
Intense Vapor & DTL Draw
Recommended power: 30–60W
Draw: DTL – Direct to Lung
Vapor: Dense and warmer
Liquid: ~60–70% VG premium/freebase liquid
Not recommended for use with high-nicotine salt liquids.
0.6Ω Mesh
Lower Power & Controlled Draw
Recommended power: 10–30W
Draw: RDL / Loose MTL
Vapor: More controlled and flavor-focused
Liquid: 50/50 freebase or suitable salt liquid
When using salt liquid, the nicotine concentration should be selected
according to the wattage, starting at lower power levels.
The wattage range specified on the coil or packaging always takes precedence.
New coils should be broken in gradually, starting from the lower end of the wattage range.
Technical Specifications
| Product type |
Replacement coil |
| Coil series |
SMOK RPM 4 |
| Resistance options |
0.15Ω Mesh / 0.6Ω Mesh |
| Installation system |
Press-Fit |
| Compatible cartridge |
SMOK Nord 6 RPM 4 empty cartridge |
| Compatible device |
SMOK Nord 6 80W Pod Kit |
| Package contents |
5 × RPM 4 coils of the selected resistance |
Compatible Device and Cartridge
The Nord 6 Side Fill 0.4Ω cartridge has a fixed, non-replaceable coil.
This RPM 4 coil cannot be installed in the Side Fill cartridge.
A Nord 6 RPM 4 empty cartridge is required for replaceable coils.
Incompatible Coils and Cartridges
- Original SMOK RPM 4 device RPM Pod and LP2 Pod cartridges
- Cartridges using SMOK RPM, RPM 2, and RPM 3 coils
- Cartridges using SMOK LP1 and LP2 coils
- Nord, Nord Pro, and other Nord coil cartridges
- SMOK Nord 5 cartridge and RPM 3 coil system
- Nord 6 Side Fill cartridge with integrated coil
Before purchasing, check the model information printed on your device,
cartridge, and coil. Do not rely solely on "RPM 4"; check the specific
cartridge and device model as well.
Liquid Selection for Coils
Liquids that are too thick, contain excessive sweeteners, or are not
suitable for the coil structure may shorten coil life. Coil lifespan
varies based on liquid, wattage, usage frequency, and vaping style.
How to Use a New Coil?
- Remove the cartridge from the device and pull the old coil straight out.
- Drip a few drops of liquid onto the cotton inlets of the new coil.
- Push the new coil firmly into the slot at the bottom of the cartridge.
- Fill the cartridge with appropriate liquid and close the cap tightly.
- Wait about 10–15 minutes for the cotton to fully saturate.
- Start using the device at the lower end of the recommended wattage range.
- Gradually increase the wattage according to your preference for flavor and vapor.
Do not fire the device when the cartridge is empty. If a new coil is used
before saturation or at power levels higher than recommended, the cotton
may burn, causing a permanent burnt taste.
Package Contents
5 × SMOK RPM 4 replacement coils
Coils in the package are of the selected resistance. Cartridge,
device, and liquid are not included in the package.
IMPORTANT WARNING: Coils that have been opened, tested, or come into contact
with e-liquid may not be eligible for return/exchange due to hygiene and
resale policies. Please verify compatibility before opening the package.
If you are unsure, contact our support team.
