Hellvape Dead Rabbit MTL RTA is a compact, rebuildable tank atomizer with single coil support, designed for a true MTL vaping experience. Its 23mm diameter stainless steel body offers flavor-focused performance and controlled vaping with low vapor production.
Thanks to its dual-post single coil build deck, adjustable bottom airflow, top-fill system, and two different tank capacities, it can be adapted to different MTL preferences.
The Dead Rabbit MTL RTA is developed for users seeking a tight and controlled draw similar to cigarette smoking. The low airflow and small chamber structure help concentrate the vapor and enhance flavor delivery.
Draw restriction can be adjusted via the airflow ring at the bottom. The structure of the coil used, its distance to the air channel, and the choice of drip tip can also affect the vaping character.
The rotating airflow ring at the base of the atomizer allows you to choose from four different air holes. As the air hole becomes smaller, the draw tightens; larger holes create a looser MTL draw.
The 0.8mm air hole provides a very tight MTL draw, while the 1.6mm option provides a looser and more airy MTL experience.
The Dead Rabbit MTL RTA features a dual-post build deck structure suitable for single coil setups. Coil legs are placed into the connection points and secured from the top with Phillips head screws.
The coil should be positioned balanced over the central air outlet. Since coil height can affect flavor intensity and draw character, alignment with the air channel should be checked after installation.
The atomizer can be used with a 2ml e-liquid capacity as standard. When the long chimney and 4ml glass tank included in the box are installed, the e-liquid capacity is increased to 4ml.
The long chimney and 4ml glass must be used together. Incorrect matching of chimneys and glass parts of different heights may cause the tank not to close properly or result in leakage.
When the top cap is unscrewed and opened, you get access to two wide filling ports. E-liquid should be added through one of the side filling channels, not into the central air chimney.
After filling is complete, ensure that the top cap is closed correctly. Liquid entering the air chimney can cause gurgling, spit-back, and leakage from the airflow channel.
Brand: Hellvape
Model: Dead Rabbit MTL RTA
Atomizer type: Rebuildable MTL tank atomizer
Vaping style: Tight and loose MTL
Diameter: 23mm
E-liquid capacity: 2ml / 4ml
Filling system: Top-fill
Build deck: Dual post single coil deck
Coil installation: Top fastening with Phillips screws
Air inlets: 0.8 / 1.2 / 1.4 / 1.6mm
Airflow: Adjustable bottom airflow
Drip tip: Replaceable 510 drip tip
Connection: Gold-plated 510 connection pin
Body material: Stainless steel
✓ Compact design for true MTL usage
✓ 23mm stainless steel body
✓ Dual post single coil build deck
✓ Four different MTL airflow options
✓ 2ml and 4ml tank capacity
✓ Top-fill system
✓ Two different 510 drip tip options
✓ Standard 510 mod connection
1 × Hellvape Dead Rabbit MTL RTA
1 × Long chimney and 4ml expansion glass
1 × 0.7Ω Ni80 Clapton coil
1 × Shoelace cotton
1 × Spare 510 drip tip
1 × Spare parts and accessories pack
1 × User manual
This product is not a classic atomizer that uses pre-built coils. It requires knowledge of coil installation, wicking, resistance measurement, wattage adjustment, and battery safety.
After the coil is installed, check the resistance value using a reliable ohm meter or a protected electronic mod. Do not fire if there is a short circuit, loose connection, or unstable resistance.
If the cotton channels are overfilled, e-liquid supply may be insufficient; if too little cotton is used, flooding, gurgling, and leakage from the airflow channel may occur.
Saturate the coil and cotton with e-liquid before first use. After filling the tank, wait about 10–15 minutes and start using it at a low wattage level.
