Hellvape Dead Rabbit Mini RDA is a rebuildable atomizer developed for flavor-focused use with its compact body, postless build deck design suitable for single coil configuration, and adjustable airflow.
The atomizer features a standard 20mm diameter and can be used in a visually balanced way on wider mods with the included 22mm beauty ring. Thanks to its compact structure, it can be paired with AIO systems, box mods, and squonk mods that have compatible connection dimensions.
The Dead Rabbit Mini RDA features a postless build deck structure designed for single coil installation. The deck has four different mounting holes for coil legs, and connections are secured with side-mounted screws.
Coil legs can be trimmed to the appropriate length using the included cutting tool. After placing the coil, the mounting screws should be tightened alternately, and it should be ensured that the coil is correctly aligned with the airflow inlets.
Four small air holes on each side of the atomizer allow for controlled airflow to the coil surface. The air holes can be opened or closed gradually by rotating the top cap.
With the air holes fully open, a more airy RDL draw is achieved; when restricted, a tighter and more controlled draw approaching MTL use can be obtained. The actual draw tightness may vary depending on the coil used, coil position, and drip tip selection.
The standard body diameter of the Dead Rabbit Mini RDA is 20mm, featuring a quite compact structure. When the beauty ring included in the box is used, the base width of the atomizer on the mod becomes 22mm.
The beauty ring does not change the actual deck diameter or working structure of the atomizer; it only creates a more cohesive look between the atomizer and the mod on wider devices.
Dead Rabbit Mini is an RDA atomizer and does not have a glass e-liquid reservoir like classic tank atomizers. In standard use, e-liquid is dripped directly onto the coil and cotton from the top.
When the BF (Bottom Feed) pin included in the package is installed, the atomizer can be used with compatible squonk mods. The BF pin should only be used in squonk devices with a bottom-feed connection system.
Brand: Hellvape
Model: Dead Rabbit Mini RDA
Atomizer type: Rebuildable dripping atomizer
Vaping style: RDL and restricted MTL
Body diameter: 20mm
Base with beauty ring: 22mm
Net weight: Approx. 26g
Coil configuration: Single coil
Build deck: Postless deck
Coil mounting: Side screws and four mounting positions
Airflow: Four adjustable air holes on each side
Drip tip: Replaceable 510 drip tip
Connection: Standard 510
Squonk compatibility: BF pin support
Body material: Stainless steel
✓ Compact 20mm stainless steel body
✓ Visual harmony with various mods via 22mm beauty ring
✓ Single coil postless build deck
✓ Four mounting positions for coil legs
✓ Adjustable RDL and restricted MTL airflow
✓ Two different 510 drip tip options
✓ Standard 510 mod connection
✓ Squonk mod support with BF pin
✓ 0.45Ω Ni80 Clapton coil included
1 × Hellvape Dead Rabbit Mini RDA
1 × 22mm Beauty Ring
1 × 0.45Ω Ni80 Clapton coil
1 × Shoelace cotton
1 × BF Bottom Feed pin
1 × Coil cutting tool
1 × Spare 510 drip tip
1 × Spare accessories pack
1 × User manual
This product is not a classic atomizer that uses pre-built coils. It requires knowledge of coil installation, wicking, resistance measurement, and battery safety.
Trim the coil legs to the recommended length and ensure the coil is correctly aligned with the airflow inlets. The coil must not contact the outer cap or the deck section of the atomizer.
After installation, check the resistance using a reliable ohm meter or a protected electronic mod. Do not fire if there is a short circuit, loose connection, or unstable resistance.
Before the first use, fully saturate the cotton with e-liquid. Do not fire while the cotton is dry, and ensure the battery used has an appropriate safe current capacity for the setup.
